# ForwardProjection about HU value

**URL:** <https://discourse.itk.org/t/forwardprojection-about-hu-value/7480>\
**Category:** Beginner Questions\
**Created:** [March 27, 2025, 2:59am UTC](https://discourse.itk.org/t/forwardprojection-about-hu-value/7480 "2025-03-27T02:59:52Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![langzhizhen](https://discourse.itk.org/user_avatar/discourse.itk.org/langzhizhen/32/4468_2.png) [@langzhizhen](https://discourse.itk.org/u/langzhizhen)\
**Post date:** [March 27, 2025, 2:59am UTC](https://discourse.itk.org/t/forwardprojection-about-hu-value/7480/1 "2025-03-27T02:59:52Z")

</div>

Hello, I have a question about the HU value. I input the data collected by CT, which is the real HU value. Is the pixel value of my reconstructed image also the real HU value? I see that the pixel values in the area outside the FOV are all 0, why is it not similar to the -1000HU value of air?

When I ForwardProjection the reconstructed result, I set the area outside the FOV to 0 and -1000 respectively, and found that the sinogram pixels were normal when 0 was set, and abnormal when -1000 was set (about -100000). Is this because of the RTK implementation?

---

<div class="post-metadata">

**Author:** ![dzenanz](https://discourse.itk.org/user_avatar/discourse.itk.org/dzenanz/32/1093_2.png) [@dzenanz](https://discourse.itk.org/u/dzenanz)\
**Post date:** [March 27, 2025, 3:16pm UTC](https://discourse.itk.org/t/forwardprojection-about-hu-value/7480/2 "2025-03-27T15:16:07Z")

</div>

This question seems to be for [RTK](https://www.openrtk.org/RTK/project/contactus.html). But since you already asked here @simon.rit might answer it.

My thoughts: sinogram might need to be strictly non-negative, while reconstructed CT values range from -1000 to … +inf?

---

<div class="post-metadata">

**Author:** ![simon.rit](https://discourse.itk.org/letter_avatar_proxy/v4/letter/s/f08c70/32.png) [@simon.rit](https://discourse.itk.org/u/simon.rit)\
**Post date:** [March 28, 2025, 2:44pm UTC](https://discourse.itk.org/t/forwardprojection-about-hu-value/7480/3 "2025-03-28T14:44:56Z")

</div>

CT images are never reconstructed in HU. In most cases, they don’t have a unit. If the projections are calibrated, they are reconstructed in an inverse length unit (e.g. \mathrm{cm}^{-1}). After reconstruction, they are converted to HU by measuring the value of air and water in a phantom and linearly rescaling so that air is -1000 and water 0.  
In RTK, the software assumes that the projections are line integrals of attenuation coefficients if they are in float or try to convert them (by taking -log of the values divided by an estimate of the I\_0 value). Then they are constructed in the inverse length unit for specifying the spacings and origin of the images (usually mm).

---

<div class="post-metadata">

**Author:** ![langzhizhen](https://discourse.itk.org/user_avatar/discourse.itk.org/langzhizhen/32/4468_2.png) [@langzhizhen](https://discourse.itk.org/u/langzhizhen)\
**Post date:** [March 29, 2025, 12:31pm UTC](https://discourse.itk.org/t/forwardprojection-about-hu-value/7480/4 "2025-03-29T12:31:08Z")

</div>

Thanks! I think so~

---

<div class="post-metadata">

**Author:** ![langzhizhen](https://discourse.itk.org/user_avatar/discourse.itk.org/langzhizhen/32/4468_2.png) [@langzhizhen](https://discourse.itk.org/u/langzhizhen)\
**Post date:** [March 29, 2025, 12:41pm UTC](https://discourse.itk.org/t/forwardprojection-about-hu-value/7480/5 "2025-03-29T12:41:24Z")

</div>

Wooo. Thanks for your professional analysis and explanation. Maybe I need to research.
